WHAT IS SOIL STABILIZATION?

Soil Stabilization is the process of altering the soil properties to enhance its strength and water repellent capability. This increases compaction density thus improving its workability and durability for heavy-duty use for roads, air strips, landfills, terminals and others.

What is Miracore Soil Stabilizer?

Historically, lime and soil cement have been used to stabilize paved or unpaved roads. However, these are expensive and its application is tedious and time consuming.
Miracore is an inexpensive liquid soil stabilizer and strengthener, which is a blend of acrylic co-polymer. This product is designed to enhance soil compaction and water resistance in order to build durable and virtually all weather-unpaved roads. It is also used for building a strong and long lasting base either for asphalt or concrete roads.

Do Miracore treated unpaved roads really last?

Miracore treated unpaved roads such as farm to market and access roads are expected to last for several years longer under normal use, requiring only minimal maintenance.

Does Miracore work in all types of soil?

Miracore will work in virtually all types of soil, as well as combinations of material.

Can Miracore replace asphalt or concrete?

Asphalt and concrete are wearing surfaces. Their service life depends on the durability of their base. Treating the base course materials with Miracore will lengthen the service life of asphalt and concrete roads considerably and minimize the need for repair and maintenance. Furthermore, due to the strong supporting base as a result of the treatment, the wearing course material required such as asphalt and cement may be reduced significantly.

What other benefits can be derived when using Miracore
Soil Stabilizer?

1. Sub-standard soil such as silt or clay, which are normally unacceptable, can now be used in road construction as main components.
2. It increases construction productivity.
3. The cost of recycling old roads will be minimal. Locally acceptable materials may be used instead of expensive re-sheeting of aggregates.
4. Miracore reduces the slippery effect of roads - increasing smoothness and safety. It minimizes the dust of unpaved roads.

What road preparation is needed prior to applying Miracore
Soil Stabilizer?

1. Roadways should be free from foreign debris (ex. roots, plastic).
2. Soft spots must be eliminated.
3. Drains should be in place and functioning to avoid accumulation of water.
4. Soil samples should be submitted to SS Geo Tech for testing. Each
Miracore Soil Stabilizer formula is tailor made for a specific type of soil.
5. The soil must not exceed its optimum moisture content prior to application of Miracore Soil Stabilizer.

Why is Miracore easy to apply?

In constructing and rehabilitating roads, Miracore can stabilize at least 3,000 square meters per day requiring only the following equipment:

-- Grader
-- Vibratory compactor
-- Water truck with spray bar and control valve

How large is the area coverage for a barrel of Miracore Soil Stabilizer?

Normally, a 200-liter barrel of Miracore Soil Stabilizer concentrate can cover 7000 square meters of road at the recommended depth of 150 mm.

How much water is mixed with Miracore Soil Stabilizer during application?

Approximately 100 liters of water are mixed with every liter of Miracore Soil Stabilizer concentrate. While applying Miracore to the dry soil, the volume of water is increased to 120 liters. Wet soil will require only 75 liters of water per 1 liter of Miracore concentrate.

How is Miracore packed and what precautions need to be observed?

Miracore Soil Stabilizer is available in 200-liter drums and 20-liter containers, which are easy to handle. Miracore concentrate should not be exposed to sunlight. It should be stored at a temperature between 32°F to 120°F. During application, the temperature should be within 50°F to 135°F.

Does Miracore require special handling?

Miracore simplifies road building and is environment friendly. No special handling is required. Although it is not harmful to the eyes or any other body parts, it should be washed off by simply water flushing.

TOP